Monthly Archives: October 2017

Guide to cutting down trees

1. Chainsaw and cutting: Being Predictable

When cutting trees with a chainsaw, preparation is essential. If you are planning a tree felling and forestry equipment, you are not only ready for a safer work session, but it will be greatly simplified to work after a tree is felled. First, ask yourself if the area presents significant obstacles, such as airlines, roads or buildings. Deploy warning signs if you know that a road crosses the forest area or that many people pass through it on a daily basis.

2. Cutting the tree: check the direction of the fall

Continue by determining the direction of the fall through careful examination of the tree. What do the branches look like and how do they grow? Also, consider the direction of the wind. If you are unsure of the natural direction of the tree’s fall, move away from the tree and check with a plumb line. Clear the area around the tree in the intended direction of the fall. Also clear the space at 45 degrees behind the tree in both directions, to give you a way to retreat.

3. Prune the trunk

When you have cleared the area, installed your warning signs and decided on the direction of the fall of the tree and your way of retreat, you must verify that you have enough fuel in the tank for the task to be accomplished. Then you have to prune the trunk to eliminate all the branches and branches that could hinder you when cutting the slash. The safest way to prune is to work with a traction chain (under the guide bar) from top to bottom. Learn how to safely and efficiently unplug a tree.

4. Choose cutting technique

When the trunk no longer has branches up to shoulder height, the stroke should be carried out. In this operation, two things must be remembered: the hinge must have a uniform thickness with the correct dimensions and the corner or the felling lever must be inserted before the shaft can pinch the bar. The technique to be used for cutting depends on the size of the tree and the slope, as well as the size of the chainsaw used for the cut. We have gathered here information about the different techniques, so that you can find the method most suited to your conditions.

5. Tools: Chainsaws and Table Saws

There are several cutting tools among which make your choice to cut down the tree. The size of the tree determines the type of forestry equipment required. For smaller trees, you normally do not need felling tools. Physical strength is enough, possibly helping you with a long boom. The cutting corner provides a greater force than the different types of levers. In extreme cases, you can use a rope and a winch, which is the safest and most powerful method for felling a tree. For bigger trees, on the other hand, you will not only need a chainsaw but also one of the best table saws once it’s cut down. A table saw will help to further cut down the chunks into the sections needed to be used.